Menu
Menu
Once the valve is connected, the tester open and close the valve repeatedly at different speeds.
All signals are recorded and compared vs the pattern signal previously set in the tester. At the end, it Will show if the performance is correct or incorrect.
Black box with a touch screen
including an electronic control board
Set of cables to carry out tests
Adapter cables
Instruction manual
It is delivered with support, mat to place the valves, and a feeder. The verifier is connected to internet and is updated with new valve refeences as new references are added to our catalog.
We select the reference of the EGR or butterfly
valve to check.
The interface tells us the reference of the cable
that we must connect.
When the test is started, the verifier performs
a series of openings and closings of the valve at different speeds, thus covering all the possibilities of working speed
During the test, the verifier records the sensor
position signal over the entire valve path.
This signal is displayed graphically on the
screen and is compared to a previously recorded standard signal.
After the comparison, the result obtained is shown
on the screen of the tester, to know in a few minutes
if the valve has a correct operation.
We manufacture and distribute electronic and electrical components for the automotive sector. We are a brand of BBB Industries.
We belong to BBB Industries group
Contact us
Avda. Gaudí S/N (Esquina Domènech i Montaner) Pol. Ind. Rubí Sud.
08191. Rubí. Barcelona. Spain
Telephone: +34 937006661
info@alfaeparts.com
Follow us on:
Tlf: 93 700 66 61
Email: cstecnico@alfaeparts.com